The Allied Telesis range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fibre cabling. Supporting both SC and ST fibre connectors, these converters can be used to extend networks with up to 2km of fibre. When connecting media converters to autonegotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Half-Duplex mode, allowing the link to be established with the greatest bandwidth. Alternatively, the MissingLink feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, as a failure in one fibre link will be signalled to the switch, allowing the second link to become active.
Half & full-duplex operation
Transparent to 802.1Q packets
Rackmountable using optional AT-MCR12,TRAY4 or TRAY1 chassis
Barcode : 0767035123400 Certifications : EMC: FCC Class A • Safety: UL-Cul, CSA/CSA, NRTL, TUV, CE compliant Depth : 9.5 cm Description : Both media converters feature an internal MDI/MDI-X switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable.The media converters also allow the installer to test the integrity of fibre connection, by forcing the converters to communicate over the fibre cable.This 'Link Test' feature allows installers to check for cable faults without the need for expensive fibreoptic test equipment. Each small media converter is powered by an external power supply unit for use in standalone applications.Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis. Fiber Ports : 1 x ST Connector Form Factor : Network Media Converter Height : 2.5 cm LED Status Indicators : Power • Link (x2) • Receive (x2) • Normal/Test
Leave a Review
You need to be logged in to leave a comment. Please log-in or if you have not yet got an account with us, you can register here.